Bunce Vee Snowploughs To Suit Tractors Or Lorries - Polymer Or Steel Blades Available

Home

Products

About Us

FAQs

Find Us

Links

productsBunce SnowploughsVee Snowploughs

Technical Data

‘V’ blade No 2
Height (m)	at nose 0.72	At wings 0.82
Clearing width (m)	At ground level: 2.25 or 2.54	At wings: 2.4 or 2.69
To Suit Vehicles	8.5 to 12 ton	Up to 80hp

‘V’ blade No 3
Height (m)	at nose 1.32	At wings 1.525
Clearing width (m)	At ground level: 2.44 or 2.74	At wings: 2.64 2.95
To Suit Vehicles	8.5 to 12 ton	Up to 80hp

The Bunce Vee ploughs have the advantage over the straight ploughs in that they can clear deeper snow. On the down side you would only be able to clear one vehicle width on the road as the snow cannot be angled to the side, as with the straight ploughs so they are designed to ‘open’ blocked roads and can in some case be used instead of a snowblower providing that you have somewhere you can push the snow to.

Included as Standard:

Mouldboard: 3mm steel on roll, 5mm steel on flat. Well braced for extra strength. We have also recently developed a unit with a polymer type face.
Steel wearing edge: Easy to replace
Skids: Malleable castings or fabricated steel at the nose. Twin D.O.T. or pneumatic castors available in lieu of skids (for extra cost).
Mounting frame: WM1A DOT type (or WM1B for extra cost) + ram, hoses & hydraulic hand pump (lorries)
Brackets: For most suitable vehicles.

Optional Extras available include:

MOT castors in lieu of skids
WM1B frame and heavy duty yokes in lieu of WM1A frame and yokes
Electro hydraulic power pack in lieu of hand pump (12/24v)
Bunce safety guard for frame

Print/Save/Download Product Sheet (PDF)

Bunce V Snow ploughs To Suit Lorries & Tractors

Bunce 3V Snowplough Fitted to an Old Lorry

BUNCE (ASHBURY) LTD - Ashbury - SWINDON - SN6 8LW - UK Tel: 01793 710212 Fax: 01793 710437